CWE - CWE-1319: Improper Protection against Electromagnetic Fault Injection (EM-FI) (4.16)

Weakness ID: 1319

Vulnerability Mapping: ALLOWED This CWE ID may be used to map to real-world vulnerabilities
Abstraction: Base Base - a weakness that is still mostly independent of a resource or technology, but with sufficient details to provide specific methods for detection and prevention. Base level weaknesses typically describe issues in terms of 2 or 3 of the following dimensions: behavior, property, technology, language, and resource.

View customized information:

For users who are interested in more notional aspects of a weakness. Example: educators, technical writers, and project/program managers. For users who are concerned with the practical application and details about the nature of a weakness and how to prevent it from happening. Example: tool developers, security researchers, pen-testers, incident response analysts. For users who are mapping an issue to CWE/CAPEC IDs, i.e., finding the most appropriate CWE for a specific issue (e.g., a CVE record). Example: tool developers, security researchers. For users who wish to see all available information for the CWE/CAPEC entry. For users who want to customize what details are displayed.

Description

The device is susceptible to electromagnetic fault injection attacks, causing device internal information to be compromised or security mechanisms to be bypassed.

Extended Description

Electromagnetic fault injection may allow an attacker to locally and dynamically modify the signals (both internal and external) of an integrated circuit. EM-FI attacks consist of producing a local, transient magnetic field near the device, inducing current in the device wires. A typical EMFI setup is made up of a pulse injection circuit that generates a high current transient in an EMI coil, producing an abrupt magnetic pulse which couples to the target producing faults in the device, which can lead to:

Bypassing security mechanisms such as secure JTAG or Secure Boot
Leaking device information
Modifying program flow
Perturbing secure hardware modules (e.g. random number generators)

Common Consequences

This table specifies different individual consequences associated with the weakness. The Scope identifies the application security area that is violated, while the Impact describes the negative technical impact that arises if an adversary succeeds in exploiting this weakness. The Likelihood provides information about how likely the specific consequence is expected to be seen relative to the other consequences in the list. For example, there may be high likelihood that a weakness will be exploited to achieve a certain impact, but a low likelihood that it will be exploited to achieve a different impact.

Scope	Impact	Likelihood
Confidentiality Integrity Access Control Availability	Technical Impact: Modify Memory; Read Memory; Gain Privileges or Assume Identity; Bypass Protection Mechanism; Execute Unauthorized Code or Commands

Potential Mitigations

Phases: Architecture and Design; Implementation

1. Redundancy - By replicating critical operations and comparing the two outputs can help indicate whether a fault has been injected.
2. Error detection and correction codes - Gay, Mael, et al. proposed a new scheme that not only detects faults injected by a malicious adversary but also automatically corrects single nibble/byte errors introduced by low-multiplicity faults.
3. Fail by default coding - When checking conditions (switch or if) check all possible cases and fail by default because the default case in a switch (or the else part of a cascaded if-else-if construct) is used for dealing with the last possible (and valid) value without checking. This is prone to fault injection because this alternative is easily selected as a result of potential data manipulation [REF-1141].
4. Random Behavior - adding random delays before critical operations, so that timing is not predictable.
5. Program Flow Integrity Protection - The program flow can be secured by integrating run-time checking aiming at detecting control flow inconsistencies. One such example is tagging the source code to indicate the points not to be bypassed [REF-1147].
6. Sensors - Usage of sensors can detect variations in voltage and current.
7. Shields - physical barriers to protect the chips from malicious manipulation.

Relationships

This table shows the weaknesses and high level categories that are related to this weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to similar items that may exist at higher and lower levels of abstraction. In addition, relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user may want to explore.

Relevant to the view "Research Concepts" (CWE-1000)

Nature	Type	ID	Name
ChildOf	Pillar - a weakness that is the most abstract type of weakness and represents a theme for all class/base/variant weaknesses related to it. A Pillar is different from a Category as a Pillar is still technically a type of weakness that describes a mistake, while a Category represents a common characteristic used to group related things.	693	Protection Mechanism Failure

Relevant to the view "Hardware Design" (CWE-1194)

Nature	Type	ID	Name
MemberOf	Category - a CWE entry that contains a set of other entries that share a common characteristic.	1388	Physical Access Issues and Concerns

Modes Of Introduction

The different Modes of Introduction provide information about how and when this weakness may be introduced. The Phase identifies a point in the life cycle at which introduction may occur, while the Note provides a typical scenario related to introduction during the given phase.

Phase	Note
Architecture and Design
Implementation

Applicable Platforms

This listing shows possible areas for which the given weakness could appear. These may be for specific named Languages, Operating Systems, Architectures, Paradigms, Technologies, or a class of such platforms. The platform is listed along with how frequently the given weakness appears for that instance.

Languages

Class: Not Language-Specific (Undetermined Prevalence)

Operating Systems

Class: Not OS-Specific (Undetermined Prevalence)

Architectures

Class: Not Architecture-Specific (Undetermined Prevalence)

Technologies

Class: System on Chip (Undetermined Prevalence)

Microcontroller Hardware (Undetermined Prevalence)

Memory Hardware (Undetermined Prevalence)

Power Management Hardware (Undetermined Prevalence)

Processor Hardware (Undetermined Prevalence)

Test/Debug Hardware (Undetermined Prevalence)

Sensor Hardware (Undetermined Prevalence)

Demonstrative Examples

Example 1

In many devices, security related information is stored in fuses. These fuses are loaded into shadow registers at boot time. Disturbing this transfer phase with EM-FI can lead to the shadow registers storing erroneous values potentially resulting in reduced security.

Colin O'Flynn has demonstrated an attack scenario which uses electro-magnetic glitching during booting to bypass security and gain read access to flash, read and erase access to shadow memory area (where the private password is stored). Most devices in the MPC55xx and MPC56xx series that include the Boot Assist Module (BAM) (a serial or CAN bootloader mode) are susceptible to this attack. In this paper, a GM ECU was used as a real life target. While the success rate appears low (less than 2 percent), in practice a success can be found within 1-5 minutes once the EMFI tool is setup. In a practical scenario, the author showed that success can be achieved within 30-60 minutes from a cold start.

Observed Examples

Reference	Description
CVE-2020-27211	Chain: microcontroller system-on-chip uses a register value stored in flash to set product protection state on the memory bus and does not contain protection against fault injection (CWE-1319) which leads to an incorrect initialization of the memory bus (CWE-1419) causing the product to be in an unprotected state.

Memberships

This MemberOf Relationships table shows additional CWE Categories and Views that reference this weakness as a member. This information is often useful in understanding where a weakness fits within the context of external information sources.

Nature	Type	ID	Name
MemberOf	Category - a CWE entry that contains a set of other entries that share a common characteristic.	1413	Comprehensive Categorization: Protection Mechanism Failure

Vulnerability Mapping Notes

Usage: ALLOWED

(this CWE ID may be used to map to real-world vulnerabilities)

Reason: Acceptable-Use

Rationale:

This CWE entry is at the Base level of abstraction, which is a preferred level of abstraction for mapping to the root causes of vulnerabilities.

Comments:

Carefully read both the name and description to ensure that this mapping is an appropriate fit. Do not try to 'force' a mapping to a lower-level Base/Variant simply to comply with this preferred level of abstraction.

Notes

Maintenance

This entry is attack-oriented and may require significant modification in future versions, or even deprecation. It is not clear whether there is really a design "mistake" that enables such attacks, so this is not necessarily a weakness and may be more appropriate for CAPEC.

Related Attack Patterns

CAPEC-ID	Attack Pattern Name
CAPEC-624	Hardware Fault Injection
CAPEC-625	Mobile Device Fault Injection

References

[REF-1141] Marc Witteman. "Secure Application Programming in the presence of Side Channel Attacks". 2017. <https://riscureprodstorage.blob.core.windows.net/production/2017/08/Riscure_Whitepaper_Side_Channel_Patterns.pdf>. URL validated: 2023-04-07.

[REF-1142] A. Dehbaoui, J. M. Dutertre, B. Robisson, P. Orsatelli, P. Maurine, A. Tria. "Injection of transient faults using electromagnetic pulses. Practical results on a cryptographic system". 2012. <https://eprint.iacr.org/2012/123.pdf>.

[REF-1143] A. Menu, S. Bhasin, J. M. Dutertre, J. B. Rigaud, J. Danger. "Precise Spatio-Temporal Electromagnetic Fault Injections on Data Transfers". 2019. <https://hal.telecom-paris.fr/hal-02338456/document>.

[REF-1144] Colin O'Flynn. "BAM BAM!! On Reliability of EMFI for in-situ Automotive ECU Attacks". <https://eprint.iacr.org/2020/937.pdf>.

[REF-1145] J. Balasch, D. Arumí, S. Manich. "Design and Validation of a Platform for Electromagnetic Fault Injection". <https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8311630>.

[REF-1146] M. Gay, B. Karp, O. Keren, I. Polian. "Error control scheme for malicious and natural faults in cryptographic modules". 2019. <https://link.springer.com/content/pdf/10.1007/s13389-020-00234-7.pdf>. URL validated: 2023-04-07.

[REF-1147] M. L. Akkar, L. Goubin, O. Ly. "Automatic Integration of Counter-Measures Against Fault Injection Attacks". <https://www.labri.fr/perso/ly/publications/cfed.pdf>.

[REF-1285] Texas Instruments. "Physical Security Attacks Against Silicon Devices". 2022-01-31. <https://www.ti.com/lit/an/swra739/swra739.pdf?ts=1644234570420>.

Content History

Submissions
Submission Date	Submitter	Organization
2020-08-27 (CWE 4.3, 2020-12-10)	Sebastien Leger, Rohini Narasipur	Bosch
2020-08-27 (CWE 4.3, 2020-12-10)
Modifications
Modification Date	Modifier	Organization
2022-04-28	CWE Content Team	MITRE
2022-04-28	updated Applicable_Platforms
2022-06-28	CWE Content Team	MITRE
2022-06-28	updated Applicable_Platforms, Relationships
2022-10-13	CWE Content Team	MITRE
2022-10-13	updated Potential_Mitigations, References, Relationships
2023-01-31	CWE Content Team	MITRE
2023-01-31	updated Related_Attack_Patterns
2023-04-27	CWE Content Team	MITRE
2023-04-27	updated References, Relationships
2023-06-29	CWE Content Team	MITRE
2023-06-29	updated Mapping_Notes
2023-10-26	CWE Content Team	MITRE
2023-10-26	updated Observed_Examples


	Site Map \| Terms of Use \| Manage Cookies \| Cookie Notice \| Privacy Policy \| Contact Us \| Use of the Common Weakness Enumeration (CWE™) and the associated references from this website are subject to the Terms of Use. CWE is sponsored by the U.S. Department of Homeland Security (DHS) Cybersecurity and Infrastructure Security Agency (CISA) and managed by the Homeland Security Systems Engineering and Development Institute (HSSEDI) which is operated by The MITRE Corporation (MITRE). Copyright © 2006–2025, The MITRE Corporation. CWE, CWSS, CWRAF, and the CWE logo are trademarks of The MITRE Corporation.

Common Weakness Enumeration

CWE-1319: Improper Protection against Electromagnetic Fault Injection (EM-FI)

Edit Custom Filter