CWE

Common Weakness Enumeration

A community-developed list of SW & HW weaknesses that can become vulnerabilities

New to CWE? click here!
CWE Most Important Hardware Weaknesses
CWE Top 25 Most Dangerous Weaknesses
Home > CWE List > CWE- Individual Dictionary Definition (4.15)  
ID

CWE-788: Access of Memory Location After End of Buffer

Weakness ID: 788
Vulnerability Mapping: DISCOURAGEDThis CWE ID should not be used to map to real-world vulnerabilities
Abstraction: BaseBase - a weakness that is still mostly independent of a resource or technology, but with sufficient details to provide specific methods for detection and prevention. Base level weaknesses typically describe issues in terms of 2 or 3 of the following dimensions: behavior, property, technology, language, and resource.
View customized information:
For users who are interested in more notional aspects of a weakness. Example: educators, technical writers, and project/program managers. For users who are concerned with the practical application and details about the nature of a weakness and how to prevent it from happening. Example: tool developers, security researchers, pen-testers, incident response analysts. For users who are mapping an issue to CWE/CAPEC IDs, i.e., finding the most appropriate CWE for a specific issue (e.g., a CVE record). Example: tool developers, security researchers. For users who wish to see all available information for the CWE/CAPEC entry. For users who want to customize what details are displayed.
×

Edit Custom Filter


+ Description
The product reads or writes to a buffer using an index or pointer that references a memory location after the end of the buffer.
+ Extended Description
This typically occurs when a pointer or its index is incremented to a position after the buffer; or when pointer arithmetic results in a position after the buffer.
+ Common Consequences
Section HelpThis table specifies different individual consequences associated with the weakness. The Scope identifies the application security area that is violated, while the Impact describes the negative technical impact that arises if an adversary succeeds in exploiting this weakness. The Likelihood provides information about how likely the specific consequence is expected to be seen relative to the other consequences in the list. For example, there may be high likelihood that a weakness will be exploited to achieve a certain impact, but a low likelihood that it will be exploited to achieve a different impact.
ScopeImpactLikelihood
Confidentiality

Technical Impact: Read Memory

For an out-of-bounds read, the attacker may have access to sensitive information. If the sensitive information contains system details, such as the current buffer's position in memory, this knowledge can be used to craft further attacks, possibly with more severe consequences.
Integrity
Availability

Technical Impact: Modify Memory; DoS: Crash, Exit, or Restart

Out of bounds memory access will very likely result in the corruption of relevant memory, and perhaps instructions, possibly leading to a crash. Other attacks leading to lack of availability are possible, including putting the program into an infinite loop.
Integrity

Technical Impact: Modify Memory; Execute Unauthorized Code or Commands

If the memory accessible by the attacker can be effectively controlled, it may be possible to execute arbitrary code, as with a standard buffer overflow. If the attacker can overwrite a pointer's worth of memory (usually 32 or 64 bits), they can redirect a function pointer to their own malicious code. Even when the attacker can only modify a single byte arbitrary code execution can be possible. Sometimes this is because the same problem can be exploited repeatedly to the same effect. Other times it is because the attacker can overwrite security-critical application-specific data -- such as a flag indicating whether the user is an administrator.
+ Relationships
Section HelpThis table shows the weaknesses and high level categories that are related to this weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to similar items that may exist at higher and lower levels of abstraction. In addition, relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user may want to explore.
+ Relevant to the view "Research Concepts" (CWE-1000)
NatureTypeIDName
ChildOfClassClass - a weakness that is described in a very abstract fashion, typically independent of any specific language or technology. More specific than a Pillar Weakness, but more general than a Base Weakness. Class level weaknesses typically describe issues in terms of 1 or 2 of the following dimensions: behavior, property, and resource.119Improper Restriction of Operations within the Bounds of a Memory Buffer
ParentOfVariantVariant - a weakness that is linked to a certain type of product, typically involving a specific language or technology. More specific than a Base weakness. Variant level weaknesses typically describe issues in terms of 3 to 5 of the following dimensions: behavior, property, technology, language, and resource.121Stack-based Buffer Overflow
ParentOfVariantVariant - a weakness that is linked to a certain type of product, typically involving a specific language or technology. More specific than a Base weakness. Variant level weaknesses typically describe issues in terms of 3 to 5 of the following dimensions: behavior, property, technology, language, and resource.122Heap-based Buffer Overflow
ParentOfVariantVariant - a weakness that is linked to a certain type of product, typically involving a specific language or technology. More specific than a Base weakness. Variant level weaknesses typically describe issues in terms of 3 to 5 of the following dimensions: behavior, property, technology, language, and resource.126Buffer Over-read
Section HelpThis table shows the weaknesses and high level categories that are related to this weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to similar items that may exist at higher and lower levels of abstraction. In addition, relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user may want to explore.
+ Relevant to the view "Software Development" (CWE-699)
NatureTypeIDName
MemberOfCategoryCategory - a CWE entry that contains a set of other entries that share a common characteristic.1218Memory Buffer Errors
Section HelpThis table shows the weaknesses and high level categories that are related to this weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to similar items that may exist at higher and lower levels of abstraction. In addition, relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user may want to explore.
+ Relevant to the view "CISQ Quality Measures (2020)" (CWE-1305)
NatureTypeIDName
ChildOfClassClass - a weakness that is described in a very abstract fashion, typically independent of any specific language or technology. More specific than a Pillar Weakness, but more general than a Base Weakness. Class level weaknesses typically describe issues in terms of 1 or 2 of the following dimensions: behavior, property, and resource.119Improper Restriction of Operations within the Bounds of a Memory Buffer
Section HelpThis table shows the weaknesses and high level categories that are related to this weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to similar items that may exist at higher and lower levels of abstraction. In addition, relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user may want to explore.
+ Relevant to the view "CISQ Data Protection Measures" (CWE-1340)
NatureTypeIDName
ChildOfClassClass - a weakness that is described in a very abstract fashion, typically independent of any specific language or technology. More specific than a Pillar Weakness, but more general than a Base Weakness. Class level weaknesses typically describe issues in terms of 1 or 2 of the following dimensions: behavior, property, and resource.119Improper Restriction of Operations within the Bounds of a Memory Buffer
+ Demonstrative Examples

Example 1

This example takes an IP address from a user, verifies that it is well formed and then looks up the hostname and copies it into a buffer.

(bad code)
Example Language:
void host_lookup(char *user_supplied_addr){
struct hostent *hp;
in_addr_t *addr;
char hostname[64];
in_addr_t inet_addr(const char *cp);

/*routine that ensures user_supplied_addr is in the right format for conversion */

validate_addr_form(user_supplied_addr);
addr = inet_addr(user_supplied_addr);
hp = gethostbyaddr( addr, sizeof(struct in_addr), AF_INET);
strcpy(hostname, hp->h_name);
}

This function allocates a buffer of 64 bytes to store the hostname, however there is no guarantee that the hostname will not be larger than 64 bytes. If an attacker specifies an address which resolves to a very large hostname, then the function may overwrite sensitive data or even relinquish control flow to the attacker.

Note that this example also contains an unchecked return value (CWE-252) that can lead to a NULL pointer dereference (CWE-476).


Example 2

In the following example, it is possible to request that memcpy move a much larger segment of memory than assumed:

(bad code)
Example Language:
int returnChunkSize(void *) {

/* if chunk info is valid, return the size of usable memory,

* else, return -1 to indicate an error

*/
...
}
int main() {
...
memcpy(destBuf, srcBuf, (returnChunkSize(destBuf)-1));
...
}

If returnChunkSize() happens to encounter an error it will return -1. Notice that the return value is not checked before the memcpy operation (CWE-252), so -1 can be passed as the size argument to memcpy() (CWE-805). Because memcpy() assumes that the value is unsigned, it will be interpreted as MAXINT-1 (CWE-195), and therefore will copy far more memory than is likely available to the destination buffer (CWE-787, CWE-788).


Example 3

This example applies an encoding procedure to an input string and stores it into a buffer.

(bad code)
Example Language:
char * copy_input(char *user_supplied_string){
int i, dst_index;
char *dst_buf = (char*)malloc(4*sizeof(char) * MAX_SIZE);
if ( MAX_SIZE <= strlen(user_supplied_string) ){
die("user string too long, die evil hacker!");
}
dst_index = 0;
for ( i = 0; i < strlen(user_supplied_string); i++ ){
if( '&' == user_supplied_string[i] ){
dst_buf[dst_index++] = '&';
dst_buf[dst_index++] = 'a';
dst_buf[dst_index++] = 'm';
dst_buf[dst_index++] = 'p';
dst_buf[dst_index++] = ';';
}
else if ('<' == user_supplied_string[i] ){

/* encode to &lt; */
}
else dst_buf[dst_index++] = user_supplied_string[i];
}
return dst_buf;
}

The programmer attempts to encode the ampersand character in the user-controlled string, however the length of the string is validated before the encoding procedure is applied. Furthermore, the programmer assumes encoding expansion will only expand a given character by a factor of 4, while the encoding of the ampersand expands by 5. As a result, when the encoding procedure expands the string it is possible to overflow the destination buffer if the attacker provides a string of many ampersands.


Example 4

In the following C/C++ example the method processMessageFromSocket() will get a message from a socket, placed into a buffer, and will parse the contents of the buffer into a structure that contains the message length and the message body. A for loop is used to copy the message body into a local character string which will be passed to another method for processing.

(bad code)
Example Language:
int processMessageFromSocket(int socket) {
int success;

char buffer[BUFFER_SIZE];
char message[MESSAGE_SIZE];

// get message from socket and store into buffer

//Ignoring possibliity that buffer > BUFFER_SIZE
if (getMessage(socket, buffer, BUFFER_SIZE) > 0) {

// place contents of the buffer into message structure
ExMessage *msg = recastBuffer(buffer);

// copy message body into string for processing
int index;
for (index = 0; index < msg->msgLength; index++) {
message[index] = msg->msgBody[index];
}
message[index] = '\0';

// process message
success = processMessage(message);
}
return success;
}

However, the message length variable from the structure is used as the condition for ending the for loop without validating that the message length variable accurately reflects the length of the message body (CWE-606). This can result in a buffer over-read (CWE-125) by reading from memory beyond the bounds of the buffer if the message length variable indicates a length that is longer than the size of a message body (CWE-130).


+ Observed Examples
ReferenceDescription
Classic stack-based buffer overflow in media player using a long entry in a playlist
Heap-based buffer overflow in media player using a long entry in a playlist
large precision value in a format string triggers overflow
attacker-controlled array index leads to code execution
OS kernel trusts userland-supplied length value, allowing reading of sensitive information
Chain: integer signedness error (CWE-195) passes signed comparison, leading to heap overflow (CWE-122)
+ Detection Methods

Fuzzing

Fuzz testing (fuzzing) is a powerful technique for generating large numbers of diverse inputs - either randomly or algorithmically - and dynamically invoking the code with those inputs. Even with random inputs, it is often capable of generating unexpected results such as crashes, memory corruption, or resource consumption. Fuzzing effectively produces repeatable test cases that clearly indicate bugs, which helps developers to diagnose the issues.

Effectiveness: High

Automated Static Analysis

Automated static analysis, commonly referred to as Static Application Security Testing (SAST), can find some instances of this weakness by analyzing source code (or binary/compiled code) without having to execute it. Typically, this is done by building a model of data flow and control flow, then searching for potentially-vulnerable patterns that connect "sources" (origins of input) with "sinks" (destinations where the data interacts with external components, a lower layer such as the OS, etc.)

Effectiveness: High

+ Memberships
Section HelpThis MemberOf Relationships table shows additional CWE Categories and Views that reference this weakness as a member. This information is often useful in understanding where a weakness fits within the context of external information sources.
NatureTypeIDName
MemberOfViewView - a subset of CWE entries that provides a way of examining CWE content. The two main view structures are Slices (flat lists) and Graphs (containing relationships between entries).884CWE Cross-section
MemberOfCategoryCategory - a CWE entry that contains a set of other entries that share a common characteristic.1129CISQ Quality Measures (2016) - Reliability
MemberOfCategoryCategory - a CWE entry that contains a set of other entries that share a common characteristic.1399Comprehensive Categorization: Memory Safety
+ Vulnerability Mapping Notes

Usage: DISCOURAGED

(this CWE ID should not be used to map to real-world vulnerabilities)

Reasons: Potential Deprecation, Frequent Misuse

Rationale:

The CWE entry might be misused when lower-level CWE entries might be available. It also overlaps existing CWE entries and might be deprecated in the future.

Comments:

If the "Access" operation is known to be a read or a write, then investigate children of entries such as CWE-787: Out-of-bounds Write and CWE-125: Out-of-bounds Read.
+ Taxonomy Mappings
Mapped Taxonomy NameNode IDFitMapped Node Name
OMG ASCRMASCRM-CWE-788
+ References
[REF-961] Object Management Group (OMG). "Automated Source Code Reliability Measure (ASCRM)". ASCRM-CWE-788. 2016-01. <http://www.omg.org/spec/ASCRM/1.0/>.
+ Content History
+ Submissions
Submission DateSubmitterOrganization
2009-10-21
(CWE 1.6, 2009-10-29)
CWE Content TeamMITRE
+ Contributions
Contribution DateContributorOrganization
2022-02-23Eric Constantin BrinzGENIA-SEC IT-Sicherheitsmanagement GmbH
Suggested corrections to extended description.
+ Modifications
Modification DateModifierOrganization
2011-06-01CWE Content TeamMITRE
updated Common_Consequences
2012-05-11CWE Content TeamMITRE
updated Common_Consequences, Demonstrative_Examples, Observed_Examples, Relationships
2013-02-21CWE Content TeamMITRE
updated Demonstrative_Examples
2014-06-23CWE Content TeamMITRE
updated Demonstrative_Examples
2015-12-07CWE Content TeamMITRE
updated Description
2017-05-03CWE Content TeamMITRE
updated Description
2017-11-08CWE Content TeamMITRE
updated Common_Consequences, Demonstrative_Examples, Observed_Examples
2019-01-03CWE Content TeamMITRE
updated References, Relationships, Taxonomy_Mappings
2020-02-24CWE Content TeamMITRE
updated Relationships
2020-06-25CWE Content TeamMITRE
updated Demonstrative_Examples
2020-08-20CWE Content TeamMITRE
updated Relationships
2020-12-10CWE Content TeamMITRE
updated Relationships
2021-07-20CWE Content TeamMITRE
updated Demonstrative_Examples
2022-04-28CWE Content TeamMITRE
updated Description
2023-01-31CWE Content TeamMITRE
updated Description
2023-04-27CWE Content TeamMITRE
updated Detection_Factors, Relationships
2023-06-29CWE Content TeamMITRE
updated Mapping_Notes
2024-07-16
(CWE 4.15, 2024-07-16)
CWE Content TeamMITRE
updated Common_Consequences
Page Last Updated: July 16, 2024